An Arduino based device that generates a password from the UID of your RFID card. You can set your computer's password to the generated string and automatically log in with the swipe of the RFID card.
- Arduino Leonardo (needs to be HID compatible)
- RFID-Modul
- LED
- 220 Ohm Resistor
- Jumper Wire (female-male and female-female)
| RFID Reader | Arduino |
|---|---|
| VCC | 3.3v |
| RST/Reset | RESET/ICSP-5 |
| SPI SS | Pin 10 |
| SPI MOSI | ICSP-4 |
| SPI MISO | ICSP-1 |
| SPI SCK | ICSP-3 |
| GND | GND |
| Led | Arduino |
|---|---|
| LED + | Pin 8 |
| LED - | GND |