trSEQ : tr style 16 steps SEQ with trig input per step
main functions : cf. Fundamental/SEQ3
steps : each step can be turned on/off manually by clicking it or can be automated
and/or externally controlled thru its own trig input
you can use an external keyboard, pad controller, or third party app to use your computer keyboard
as a midi keyboard, via Core/midi-trigger-to-CV or Core/midi-to-CV
or any CV/trigger source/modifier like Audible/Bernouilli's gate for randomness
tap in : input notes by clicking on the pad or sending trigs or sustained gates to the corresponding input
(cf. steps)
clear : same as "tap in" but for deleting notes
STEPS : variable quantiser
originally conceived as a companion for PLAYER,
used between a LFO or a SEQ CV out and PLAYER's start input
it will quantize 0 to 10 Volts CV to regular steps,
allowing for regular slicing of breakbeat loops or anything else
PLAYER : sampler [mod from Bidoo's OUAIve]
use right click menu to select a .wav or .aif sample (some hi-res or compressed ones won't open)
gate : the sample will be played while the gate is open (i.e. input > 0 V.)
try retrigger mode (right click menu) with most seq's
or use an enveloppe or ML gate delay to have a correct gate for your needs
start : use knob to choose start point and/or attenuverted CV input
(don't forget to "open" the attenuverter)
speed : same as start but for speed, very low setting will play reverse (from start point)
trick : use a square fast LFO on gate input and a saw LFO on start input to get dirty time stretch
PEAK : Peak limiter
threshold : turn it down from 10 V. to 0 V. until it lights up as the limiter acts
make up : turn it up to adjust gain, lights up when signal gets over 10 V.
trick : if input is unplugged, PEAK will output screen's voltage
it can also be use as an attenu/amp.
CUBE : a blank panel turned weird module
inputs : each input receives CV to controle the rotation speed on a different axis
modulate with a LFO, or any other signal
output : is Z coordinate of one of the points of the cube
found it quite unpredictable, especially when inputs are modulated
Pretty and experimental :)
FOUR : 4 trigged solos/mutes
each signal "line" can be turned on/off or soloed, manually and/or triggered thru its own trig input
you can use an external keyboard, pad controller, or third party app to use your computer keyboard
as a midi keyboard, via Core/midi-trigger-to-CV or Core/midi-to-CV
or any CV/trigger source/modifier like Audible/Bernouilli's gate for randomness
MONO STEREO MASTER : modular mixer
you can use them in combination to make a mixer
with any number of mono and/or stereo channels, sub groups, etc.
in : gets your mono or stero signal in
out : on MONO, duplicates the signal post gain, post on and solo,
for redirection to an FX (reverb, delay, ...) or any other use
gain : multiplies the in signal by 0 to 2, 1 is at 12 o'clock/reset position
beware of your levels, a red light will bright up over 10 V.
gain input : over-rides gain knob and turns 0 to 10 V. input
into 0 to 2 multiplier (1 being 5 V.)
for automation and/or external control
on : switches the signal of this channel on/off
on input : inverts on state on trig
for automation and/or external control
solo : turns off un-soloed channels in a solo-group, cf. solo-link
solo input : inverts solo state on trig
for automation and/or external control
pan : attenuates one side of the stereo signal
pan input : over-rides pan knob and turns 0 to 10 V. input into left to right (5 being center)
for automation and/or external control
stereo bus : stereo signal gets in
adds gained & pan'ed input signal
stereo signal gets out to next channel or master
S-L : solo link, make a solo group so that solo'ing a channel or many will turn off others
by linking them so they can communicate,
don't forget to link the last to the first.
METRO : master clock and metronome
BPM : sets the beat per minute tempo
BPM input : over-rides BPM knob
turns 0 to 10 V. into 0 to 300 bpm
on : turns METRO on/off, starts on first beat (most of the times)
on input : turns METRO on/off on trig
reset : sets METRO back to 1st beat without stoping it
use to reset dividers and seqs on the fly
mes. light : will light up on 1st beat out of 4
beat light : will light up on every beat
head speaker : outputs audio metronome
TOC-toc-toc-toc-TOC-toc-toc-toc-TOC-toc...
start : will output a trig on start or reset
x 12 : will output 12 trigs per beat
EACH : clock divider
left circuit 'start' will receive and duplicate
start/reset trigs to its ouputs
right circuit 'x 12' will receive and duplicate
trigs stream ('x 12' from METRO) to its output
and 1 out of DIV. (knob/screen) trig to the middle output
allow sync'ing of seqs
3 will give you 1/4 of beat, 4 triolets, 6 half beat and so on
DIV. input : over-rides DIV. knob
turns 0 to 10 V. to 1 to 12 divs
trick : chain EACHs to trig events every mesure, 4 mesures or 16 mesures
PATCH : patch bay
mainly here to take cables out of the view
signals follow the lines between inputs and outputs
DAVE : blank panel
please, DONATE so i can buy other devs'modules, and thanks to those who already did :)