Skip to content

Support for Surface Laptop 6 #1432

Open
Open
Support for Surface Laptop 6#1432

Description

@leenozara
leenozara
opened on May 2, 2024

I'm running the following commands on a Surface Laptop 6:

Preparation:

  1. Clone github.com/linux-surface/surface-aggregator-module and cd into it.
  2. Run sudo modprobe surface_aggregator_cdev

For Battery/Charger

Run the following commands and post the output of each

sudo ./scripts/ssam/ctrl.py request 0x02 0x01 0x02 0x01 0x01
sudo ./scripts/ssam/ctrl.py request 0x02 0x01 0x0d 0x01 0x01

For Internal HID Devices

Run the following command for $x = 0 until $x = 10 and post the output of each

sudo ./scripts/ssam/hid.py hid-get-descriptor 1 $x 0

For Type-Cover HID Devices

Run the following command for $x = 0 until $x = 10 and post the output of each

sudo ./scripts/ssam/hid.py hid-get-descriptor 2 $x 0

Activity

  1. leenozara commented on May 2, 2024

    @leenozara
    leenozara
    on May 2, 2024
    Author

    For Battery/Charger

    sudo ./scripts/ssam/ctrl.py request 0x02 0x01 0x02 0x01 0x01
00 00 00 00 00 54 ba 00 00 e6 b9 00 00 01 00 00 00 9c 1d 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e8 03 00 00 ff ff ff ff ff ff ff ff e8 03 00 00 e8 03 00 00 0a 00 00 00 0a 00 00 00 31 32 39 32 32 33 34 30 30 32 00 00 00 00 00 00 00 00 00 00 00 37 30 32 37 37 35 37 33 35 30 00 4c 49 4f 4e 00 53 4d 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 
sudo ./scripts/ssam/ctrl.py request 0x02 0x01 0x0d 0x01 0x01
01 00 00 00

    For Internal HID Devices

    sudo ./scripts/ssam/hid.py hid-get-descriptor 1 0 0
[]
 
sudo ./scripts/ssam/hid.py hid-get-descriptor 1 1 0
[]
 
sudo ./scripts/ssam/hid.py hid-get-descriptor 1 2 0
[]
 
sudo ./scripts/ssam/hid.py hid-get-descriptor 1 3 0
[]
 
sudo ./scripts/ssam/hid.py hid-get-descriptor 1 4 0
[]
 
sudo ./scripts/ssam/hid.py hid-get-descriptor 1 5 0
[]
 
sudo ./scripts/ssam/hid.py hid-get-descriptor 1 6 0
[9, 33, 17, 1, 0, 1, 34, 97, 1]
 
sudo ./scripts/ssam/hid.py hid-get-descriptor 1 7 0
[9, 33, 17, 1, 0, 1, 34, 109, 0]
 
sudo ./scripts/ssam/hid.py hid-get-descriptor 1 8 0
[]
 
sudo ./scripts/ssam/hid.py hid-get-descriptor 1 9 0
[]
 
sudo ./scripts/ssam/hid.py hid-get-descriptor 1 10 0
[]

    For Type-Cover HID Devices

    sudo ./scripts/ssam/hid.py hid-get-descriptor 2 0 0
[9, 33, 17, 1, 0, 1, 34, 124, 3]

sudo ./scripts/ssam/hid.py hid-get-descriptor 2 1 0
[9, 33, 17, 1, 0, 1, 34, 155, 0]

sudo ./scripts/ssam/hid.py hid-get-descriptor 2 2 0
[]

sudo ./scripts/ssam/hid.py hid-get-descriptor 2 3 0
[9, 33, 17, 1, 0, 1, 34, 185, 2]

sudo ./scripts/ssam/hid.py hid-get-descriptor 2 4 0
[]

sudo ./scripts/ssam/hid.py hid-get-descriptor 2 5 0
[9, 33, 17, 1, 0, 1, 34, 78, 0]

sudo ./scripts/ssam/hid.py hid-get-descriptor 2 6 0
[]

sudo ./scripts/ssam/hid.py hid-get-descriptor 2 7 0
[]

sudo ./scripts/ssam/hid.py hid-get-descriptor 2 8 0
[]

sudo ./scripts/ssam/hid.py hid-get-descriptor 2 9 0
[]

sudo ./scripts/ssam/hid.py hid-get-descriptor 2 10 0
[]

  2. qzed commented on May 2, 2024

    @qzed
    qzed
    on May 2, 2024
    Member

    I've only had a quick glance, but it looks pretty much like the SL5. The only difference I could spot is an additional node for (what based on other devices should be) HID-based sensors.

    So adding something like

    static const struct software_node *ssam_node_group_sl6[] = {
	&ssam_node_root,
	&ssam_node_bat_ac,
	&ssam_node_bat_main,
	&ssam_node_tmp_perf_profile,
	&ssam_node_hid_main_keyboard,
	&ssam_node_hid_main_touchpad,
	&ssam_node_hid_main_iid5,
	&ssam_node_hid_sam_sensors,
	&ssam_node_hid_sam_ucm_ucsi,
	NULL,
};

    to surface_aggregator_registry.c should do the trick.

    Note that this alone is not enough. We also need the repsective ACPI device ID for adding the entry here. For that, could you also run our "diagnostics" script (see here) and upload the archive it creates? This will gather some info about the system (including an ACPI dump), which we will need to figure out that ID.

  3. leenozara commented on May 3, 2024

    @leenozara
    leenozara
    on May 3, 2024
    Author

    ACPI dump:

    acpidump.txt

  4. leenozara commented on May 4, 2024

    @leenozara
    leenozara
    on May 4, 2024
    Author

    diagnostics.sh full archive:

    diagnostics.tar.gz

  5. quo commented on May 5, 2024

    @quo
    quo
    on May 5, 2024

    So the touchscreen won't work with the version of ithc currently in the Surface kernel, because apparently Intel changed the final MTL device IDs from those that I found in an .inf file a while ago.

    I figure it's probably better to just match on the vendor and class ID instead of device ID, since the THC is the only known PCI device that uses the pen input class: https://linux-hardware.org/?view=search&classid=09-01&typeid=all&busid=pci#list (the "Audio Controllers" are actually mislabeled THCs).

    So I've made that change in quo/ithc-linux@297427b. (Tested on my SP7+.)

    There also appears to be only one THC device on the PCI bus, even though ACPI contains configuration data for a second THC. So the touchpad is presumably not connected to a THC on the SL6.

    EDIT:
    @leenozara
    You may be able to get the touchscreen working without updating the ithc driver, by forcing ithc to load using the following commands:

    sudo modprobe -r ithc
echo ithc | sudo tee /sys/devices/pci0000:00/0000:00:10.0/driver_override
sudo modprobe ithc

  6. leenozara commented on May 5, 2024

    @leenozara
    leenozara
    on May 5, 2024
    Author

    You may be able to get the touchscreen working without updating the ithc driver, by forcing ithc to load using the following commands

    I tried this but no change, unfortunately.

  7. quo commented on May 5, 2024

    @quo
    quo
    on May 5, 2024

    Can you post the output of the commands and the output of dmesg?

  8. leenozara commented on May 5, 2024

    @leenozara
    leenozara
    on May 5, 2024
    Author

    Sure:

    $ sudo modprobe -r ithc
$ echo ithc | sudo tee /sys/devices/pci0000:00/0000:00:10.0/driver_override
ithc
$ sudo modprobe ithc
$

    dmesg:

    [27019.646401] ithc 0000:00:10.0: ACPI config: InputHeaderAddr=0x1000 InputBodyAddr=0x1004 OutputBodyAddr=0x2000 ReadOpcode=0xeb WriteOpcode=0xe2 ReadMode=2 WriteMode=2 Frequency=32000000 LimitPacketSize=0 TxDelay=0 ActiveLTR=1023 IdleLTR=1023
[27020.736762] ithc 0000:00:10.0: timed out waiting for reg 0x1110 mask 0x00000010 val 0x00000010
[27020.736771] ithc 0000:00:10.0: wait_for_report: waitl failed with -110
[27020.736773] ithc 0000:00:10.0: ithc_quickspi_init: ithc_quickspi_init_hidspi failed with -110
[27020.736775] ithc 0000:00:10.0: ithc_init_device: ithc_quickspi_init failed with -110
[27020.736777] ithc 0000:00:10.0: ithc_start: ithc_init_device failed with -110
[27020.736780] ithc: probe of 0000:00:10.0 failed with error -110

  9. quo commented on May 5, 2024

    @quo
    quo
    on May 5, 2024

    Ah crap. So Intel or MS changed something again. :(
    I'll have a better look at this in a few weeks.

  10. leenozara commented on May 5, 2024

    @leenozara
    leenozara
    on May 5, 2024
    Author

    Let me know anytime I can help. Sadly I don't know much about hardware and driver development, otherwise I'd help with code. Maybe I can take a look at pull requests for previous new devices and see what was done there.

    Getting keyboard, trackpad and battery status working at a minimum would be the most significant improvement.

  11. qzed
    assigned
    qzed
    and unassigned
    qzed
    on May 5, 2024

  12. qzed commented on May 5, 2024

    @qzed
    qzed
    on May 5, 2024
    Member

    The following patch should enable SAM support (and with that hopefully battery, keyboard, and touchpad). Would be great if you can test it. In particular temperature sensors and fan, because we haven't enabled and tested them on the SL5, but it looks like they should be there on the SL6.

    From 5b8a335cbd8d47fca755d7772a452d0f86f35f9c Mon Sep 17 00:00:00 2001
From: Maximilian Luz <[email protected]>
Date: Sun, 5 May 2024 18:46:08 +0200
Subject: [PATCH] platform/surface: aggregator_registry: Add support for
 Surface Laptop 6

---
 .../surface/surface_aggregator_registry.c     | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index 058b6654a91af..07a4c4e1120d3 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -273,6 +273,22 @@ static const struct software_node *ssam_node_group_sl5[] = {
 	NULL,
 };
 
+/* Devices for Surface Laptop 6. */
+static const struct software_node *ssam_node_group_sl6[] = {
+	&ssam_node_root,
+	&ssam_node_bat_ac,
+	&ssam_node_bat_main,
+	&ssam_node_tmp_perf_profile_with_fan,
+	&ssam_node_tmp_sensors,
+	&ssam_node_fan_speed,
+	&ssam_node_hid_main_keyboard,
+	&ssam_node_hid_main_touchpad,
+	&ssam_node_hid_main_iid5,
+	&ssam_node_hid_sam_sensors,
+	&ssam_node_hid_sam_ucm_ucsi,
+	NULL,
+};
+
 /* Devices for Surface Laptop Studio 1. */
 static const struct software_node *ssam_node_group_sls1[] = {
 	&ssam_node_root,
@@ -403,6 +419,9 @@ static const struct acpi_device_id ssam_platform_hub_match[] = {
 	/* Surface Laptop 5 */
 	{ "MSHW0350", (unsigned long)ssam_node_group_sl5 },
 
+	/* Surface Laptop 6 */
+	{ "MSHW0530", (unsigned long)ssam_node_group_sl6 },
+
 	/* Surface Laptop Go 1 */
 	{ "MSHW0118", (unsigned long)ssam_node_group_slg1 },
 
-- 
2.44.0

  13. leenozara commented on May 5, 2024

    @leenozara
    leenozara
    on May 5, 2024
    Author

    Nice! I'll apply this patch tomorrow and update you here.

    I have access to an SL5 so I can help with testing that after SL6.

  14. leenozara commented on May 7, 2024

    @leenozara
    leenozara
    on May 7, 2024
    Author

    Hi @qzed your patch works:

    • Touchpad including gestures works
    • Keyboard works
    • Battery recognized

    sensors no load on battery power:

    iwlwifi_1-virtual-0
Adapter: Virtual device
temp1:        +32.0°C  

surface_thermal-virtual-0
Adapter: Virtual device
I_RTS1:       +33.6°C  
I_RTS2:       +36.5°C  
I_RTS3:       +35.2°C  
I_RTS4:       +34.6°C  
I_RTS5:       +32.3°C  
I_RTS6:       +32.3°C  
I_RTS7:       +36.5°C  
I_RTS1:       +32.4°C  
I_RTS2:       +32.9°C  
I_RTS3:       +33.2°C  

nvme-pci-0100
Adapter: PCI adapter
Composite:    +34.9°C  (low  = -40.1°C, high = +83.8°C)
                       (crit = +87.8°C)
Sensor 1:     +45.9°C  (low  = -273.1°C, high = +65261.8°C)
Sensor 2:     +34.9°C  (low  = -273.1°C, high = +65261.8°C)

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +46.0°C  (high = +110.0°C, crit = +110.0°C)
Core 0:        +42.0°C  (high = +110.0°C, crit = +110.0°C)
Core 1:        +42.0°C  (high = +110.0°C, crit = +110.0°C)
Core 2:        +42.0°C  (high = +110.0°C, crit = +110.0°C)
Core 3:        +42.0°C  (high = +110.0°C, crit = +110.0°C)
Core 4:        +41.0°C  (high = +110.0°C, crit = +110.0°C)
Core 5:        +41.0°C  (high = +110.0°C, crit = +110.0°C)
Core 6:        +41.0°C  (high = +110.0°C, crit = +110.0°C)
Core 7:        +41.0°C  (high = +110.0°C, crit = +110.0°C)
Core 8:        +42.0°C  (high = +110.0°C, crit = +110.0°C)
Core 12:       +43.0°C  (high = +110.0°C, crit = +110.0°C)
Core 16:       +41.0°C  (high = +110.0°C, crit = +110.0°C)
Core 20:       +41.0°C  (high = +110.0°C, crit = +110.0°C)
Core 24:       +44.0°C  (high = +110.0°C, crit = +110.0°C)
Core 28:       +41.0°C  (high = +110.0°C, crit = +110.0°C)
Core 32:       +45.0°C  (high = +110.0°C, crit = +110.0°C)
Core 33:       +45.0°C  (high = +110.0°C, crit = +110.0°C)

BAT1-virtual-0
Adapter: Virtual device
in0:           8.37 V  

surface_fan-virtual-0
Adapter: Virtual device
fan1:           0 RPM

    sensors under load on battery power (compiling kernel make -j22) and 'balanced' power mode:

    iwlwifi_1-virtual-0
Adapter: Virtual device
temp1:        +41.0°C  

surface_thermal-virtual-0
Adapter: Virtual device
I_RTS1:       +40.8°C  
I_RTS2:       +59.9°C  
I_RTS3:       +55.0°C  
I_RTS4:       +42.2°C  
I_RTS5:       +34.4°C  
I_RTS6:       +34.4°C  
I_RTS7:       +59.9°C  
I_RTS1:       +43.8°C  
I_RTS2:       +38.7°C  
I_RTS3:       +37.0°C  

nvme-pci-0100
Adapter: PCI adapter
Composite:    +48.9°C  (low  = -40.1°C, high = +83.8°C)
                       (crit = +87.8°C)
Sensor 1:     +63.9°C  (low  = -273.1°C, high = +65261.8°C)
Sensor 2:     +48.9°C  (low  = -273.1°C, high = +65261.8°C)

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +78.0°C  (high = +110.0°C, crit = +110.0°C)
Core 0:        +75.0°C  (high = +110.0°C, crit = +110.0°C)
Core 1:        +75.0°C  (high = +110.0°C, crit = +110.0°C)
Core 2:        +74.0°C  (high = +110.0°C, crit = +110.0°C)
Core 3:        +74.0°C  (high = +110.0°C, crit = +110.0°C)
Core 4:        +74.0°C  (high = +110.0°C, crit = +110.0°C)
Core 5:        +74.0°C  (high = +110.0°C, crit = +110.0°C)
Core 6:        +74.0°C  (high = +110.0°C, crit = +110.0°C)
Core 7:        +74.0°C  (high = +110.0°C, crit = +110.0°C)
Core 8:        +77.0°C  (high = +110.0°C, crit = +110.0°C)
Core 12:       +78.0°C  (high = +110.0°C, crit = +110.0°C)
Core 16:       +75.0°C  (high = +110.0°C, crit = +110.0°C)
Core 20:       +79.0°C  (high = +110.0°C, crit = +110.0°C)
Core 24:       +76.0°C  (high = +110.0°C, crit = +110.0°C)
Core 28:       +76.0°C  (high = +110.0°C, crit = +110.0°C)
Core 32:       +76.0°C  (high = +110.0°C, crit = +110.0°C)
Core 33:       +76.0°C  (high = +110.0°C, crit = +110.0°C)

BAT1-virtual-0
Adapter: Virtual device
in0:           8.04 V  

surface_fan-virtual-0
Adapter: Virtual device
fan1:        4639 RPM

    sensors under load plugged-in/charging (compiling kernel make -j22) and 'performance' power mode:

    iwlwifi_1-virtual-0
Adapter: Virtual device
temp1:        +46.0°C  

surface_thermal-virtual-0
Adapter: Virtual device
I_RTS1:       +46.8°C  
I_RTS2:       +60.3°C  
I_RTS3:       +59.9°C  
I_RTS4:       +47.4°C  
I_RTS5:       +36.0°C  
I_RTS6:       +36.0°C  
I_RTS7:       +60.3°C  
I_RTS1:       +49.1°C  
I_RTS2:       +41.8°C  
I_RTS3:       +39.7°C  

nvme-pci-0100
Adapter: PCI adapter
Composite:    +53.9°C  (low  = -40.1°C, high = +83.8°C)
                       (crit = +87.8°C)
Sensor 1:     +69.8°C  (low  = -273.1°C, high = +65261.8°C)
Sensor 2:     +53.9°C  (low  = -273.1°C, high = +65261.8°C)

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +79.0°C  (high = +110.0°C, crit = +110.0°C)
Core 0:        +76.0°C  (high = +110.0°C, crit = +110.0°C)
Core 1:        +76.0°C  (high = +110.0°C, crit = +110.0°C)
Core 2:        +76.0°C  (high = +110.0°C, crit = +110.0°C)
Core 3:        +77.0°C  (high = +110.0°C, crit = +110.0°C)
Core 4:        +75.0°C  (high = +110.0°C, crit = +110.0°C)
Core 5:        +75.0°C  (high = +110.0°C, crit = +110.0°C)
Core 6:        +75.0°C  (high = +110.0°C, crit = +110.0°C)
Core 7:        +75.0°C  (high = +110.0°C, crit = +110.0°C)
Core 8:        +78.0°C  (high = +110.0°C, crit = +110.0°C)
Core 12:       +79.0°C  (high = +110.0°C, crit = +110.0°C)
Core 16:       +76.0°C  (high = +110.0°C, crit = +110.0°C)
Core 20:       +79.0°C  (high = +110.0°C, crit = +110.0°C)
Core 24:       +77.0°C  (high = +110.0°C, crit = +110.0°C)
Core 28:       +76.0°C  (high = +110.0°C, crit = +110.0°C)
Core 32:       +79.0°C  (high = +110.0°C, crit = +110.0°C)
Core 33:       +79.0°C  (high = +110.0°C, crit = +110.0°C)

BAT1-virtual-0
Adapter: Virtual device
in0:           8.46 V  

surface_fan-virtual-0
Adapter: Virtual device
fan1:        7810 RPM

    Are there any specifics diagnostics, commands, etc you'd like me to perform that would help?

  15. leenozara commented on May 7, 2024

    @leenozara
    leenozara
    on May 7, 2024
    Author

    @quo The ithc modprobe commands now have a different error output:

    sudo modprobe -r ithc
echo ithc | sudo tee /sys/devices/pci0000:00/0000:00:10.0/driver_override
sudo modprobe ithc

    dmesg:

    [  132.944327] ithc 0000:00:10.0: enabling device (0000 -> 0002)
[  132.947730] ithc 0000:00:10.0: ACPI config: InputHeaderAddr=0x1000 InputBodyAddr=0x1004 OutputBodyAddr=0x2000 ReadOpcode=0xeb WriteOpcode=0xe2 ReadMode=2 WriteMode=2 Frequency=32000000 LimitPacketSize=0 TxDelay=0 ActiveLTR=1023 IdleLTR=1023
[  133.138611] ithc 0000:00:10.0: SPI data size too small for device descriptor (4)
[  133.138617] ithc 0000:00:10.0: ithc_quickspi_init: ithc_quickspi_init_hidspi failed with -90
[  133.138620] ithc 0000:00:10.0: ithc_init_device: ithc_quickspi_init failed with -90
[  133.138622] ithc 0000:00:10.0: ithc_start: ithc_init_device failed with -90
[  133.138625] ithc: probe of 0000:00:10.0 failed with error -90

  16. qzed commented on May 7, 2024

    @qzed
    qzed
    on May 7, 2024
    Member

    @leenozara Thanks! That looks like things are working. A dmesg log from when you applied that would still be nice though, to confirm that there are no errors or warnings. If that doesn't show anything out of the ordinary, I think we're good to apply it.

    Apart from that: Since you mentioned you have access to a SL5, you could try adding/replacing the following nodes to the SL5 entry:

    &ssam_node_tmp_perf_profile_with_fan,    // replaces ssam_node_tmp_perf_profile
&ssam_node_tmp_sensors,
&ssam_node_fan_speed,

    And then maybe also try to run the two commands for the HID devices again on the SL5, just to make sure we're not missing anything (since the SL6 has an additional sensor device).

    And I think it's best if you open a new issue for that so that we don't mix the two devices here.

  17. leenozara commented on May 8, 2024

    @leenozara
    leenozara
    on May 8, 2024
    Author

    dmesg:
    dmesg.log

    For SL5 I should have the device by end of the week. I'll set create a separate issue that pertains to testing linux-surface existing support for the SL5.

    Thanks!

  18. qzed commented on May 10, 2024

    @qzed
    qzed
    on May 10, 2024
    Member

    Looks like everything is working (for SAM at least).

    @StollD if you have some time feel free to apply this. I'm away for the next three weeks and I'm not sure if I can manage to build/test/release anything during that time (only took the SPX with me...).

  19. quo commented on May 11, 2024

    @quo
    quo
    on May 11, 2024

    @quo The ithc modprobe commands now have a different error output

    Weird. But I don't think it's related to the SAM patch.

    Can you try probing with debug logging enabled?

    sudo modprobe -r ithc
echo ithc | sudo tee /sys/devices/pci0000:00/0000:00:10.0/driver_override
sudo modprobe ithc logregs=1 dyndbg=+pflmt

    Please repeat a few times to see how repeatable/variable the errors are. And please attach the dmesg log here.

    Could you also try if the following patch for ithc makes any difference?

    diff --git a/src/ithc-quickspi.c b/src/ithc-quickspi.c
index 760e55e..7d3e506 100644
--- a/src/ithc-quickspi.c
+++ b/src/ithc-quickspi.c
@@ -323,6 +323,9 @@ static int ithc_quickspi_init_regs(struct ithc *ithc, const struct ithc_acpi_con
 		QUICKSPI_CONFIG2_DISABLE_WRITE_ADDRESS_INCREMENT |
 		QUICKSPI_CONFIG2_ENABLE_WRITE_STREAMING_MODE, 0);
 
+	bitsl_set(&ithc->regs->dma_rx[0].init_unknown, INIT_UNKNOWN_3);
+	bitsl_set(&ithc->regs->dma_rx[0].init_unknown, INIT_UNKNOWN_31);
+
 	return 0;
 }

  20. leenozara commented on May 20, 2024

    @leenozara
    leenozara
    on May 20, 2024
    Author

    @quo apologies for the long delay.

    Dmesg logs:
    dmesg1.txt
    dmesg2.txt
    dmesg3.txt

    I also tried the patch but no change. I'm back at my desk and can continue to assist you.

  21. leenozara commented on May 25, 2024

    @leenozara
    leenozara
    on May 25, 2024
    Author

    @qzed An observation: I've noticed that scrolling with the touchpad on the SL6 using your recent patch isn't smooth. Page scrolling stops when fingers stop moving in the direction. I didn't notice this until I also used my SL5, which does have smooth scrolling.

  22. quo commented on May 27, 2024

    @quo
    quo
    on May 27, 2024

    @leenozara Thanks!
    So it looks like it consistently fails to read the device descriptor, sometimes with a timeout, sometimes with an invalid packet.

    I finally had some time to look at the SL6 UEFI driver, and noticed that for some reason Intel has changed the layout of the SPI opcode registers. The rest of the initialization code looks basically the same as in the SLS2 driver, so hopefully that's the only required change.

    I've created a separate branch with this change:
    https://github.com/quo/ithc-linux/tree/sl6
    Please let me know if this branch works. (And please attach dmesg again, regardless of whether it works or doesn't.)

  23. quo commented on Jun 15, 2024

    @quo
    quo
    on Jun 15, 2024

    The ithc sl6 branch has been confirmed to work on a Meteor Lake ThinkBook (quo/ithc-linux#5 (comment)). And the SP10 will also require these changes. So I've merged the branch into master.

  24. mitchweaver commented on Feb 25, 2026

    @mitchweaver
    mitchweaver
    on Feb 25, 2026

    Hello all, could someone please update the wiki here with current status for this device. I'm looking at picking one up but want to be sure it's supported enough to daily. Much appreciated.

    https://github.com/linux-surface/linux-surface/wiki/Surface-Laptop-6

    edit: I see Standa adding some things. Much appreciated :D

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Metadata

Metadata

Assignees

No one assigned

    Labels

    No labels
    No labels

    Type

    No type

    Projects

    No projects

      Milestone

      No milestone

      Relationships

      None yet

      Development

      No branches or pull requests

      Issue actions