###

# This is a log of major user-visible changes in each MacPorts release.

###

Release 2.12.6 (2026-08-26 by jmr)

- Fixed potential unreliable application of network proxy settings

with background fetches. (jmr in 6d9edb0)

- Fixed occasional failure to sync the PortIndex, which required

portindex to run locally. (fhgwright in 928dc47)

- Added documentation for the 'none' option for 'port select'.

(cvengler in 1552e82)

- Various reliability improvements for trace mode.

(cal in 6dda4cc, 1db3e7f, bea36d7)

Release 2.12.5 (2026-04-22 by jmr)

- Fixed upgrade --force sometimes failing when an archive cannot be

fetched, instead of falling back to building from source.

(#73659, jmr in 737d844)

- Ensure that 'port clean --archive' also removes all associated

signature files if present. (jmr in 3e46372)

Release 2.12.4 (2026-03-18 by jmr)

- Fixed occasional lchown errors when upgrading ports.

(#73514, jmr in 07ff611)

- Fixed occasional permissions errors when using a ports tree in a

git repo. (pguyot in b4709d0)

- Fixed 'port deps' error with unindexed ports. (jmr in 2dff719)

- Added --with-git option to configure.

(#72451, herbygillot in 3ea4d20)

Release 2.12.3 (2026-03-09 by jmr)

- Fixed checksum mismatch when ports that share one or more

distfiles are fetched by an action. (#73587, jmr in c4d2176)

- Fixed duplicate "Upgrading already installed dependencies"

message. (jmr in dcbe314)

Release 2.12.2 (2026-02-28 by jmr)

- Files in the destroot owned by the unprivileged macports user are

now chowned to ${install.user}. (#73516, jmr in a1223b7, fc5a3d6)

- Fixed error when starting archive fetch under some circumstances.

(jmr in 4508cb3)

- Fixed unnecessarily downloading an archive when a port has

already been destrooted locally. (jmr in bbca8be)

Release 2.12.1 (2026-02-06 by jmr)

- Fixed error extracting ports synced with rsync on systems with an

older version of tar. (#73467, jmr in cf8e6d5)

- Fixed 'port upgrade' not respecting the -p option.

(#73472, jmr in c81f3d6)

- Enabled signature verification for the daily tarball, now that a

signature is being published for it. (jmr in a472c5a)

- Enabled threaded fetching for 'port mirror'. (jmr in be806ac)

Release 2.12.0 (2026-02-03 by jmr)

- Files are now downloaded in background threads, so downloads

needed for upcoming port installations can progress while other

ports are being installed. The new fetch_threads macports.conf

option controls the maximum number of simultaneous downloads.

(jmr in 632eab5)

- Performance of dependency calculation is improved by checking

availability of archives in background threads, and by processing

ports that don't need that check first.

(jmr in 2eed186, e668a7b, e83422f)

- 'port upgrade' now displays the list of ports that will be

upgraded or installed before starting, and asks for confirmation

if running interactively. (jmr in e3def17)

- 'port upgrade' now has a progress counter showing the total

number of ports to be upgraded and the current port's position in

the list. (#5001, jmr in 82964b8)

- Syncing the ports tree via rsync should now perform better by

only extracting updated files from the tarball. (jmr in df4d61b)

- Updated the bundled Tcl to 8.6.17. (jmr in 1555f20)

- The use_* options related to the type of distfile (use_bzip2,

use_xz, etc) have been reworked. Setting one of them now unsets

the rest. The extract.cmd, extract.pre_args, extract.post_args,

and extract.suffix options now have dynamic defaults based on

which of the use_* options are set (if any). Extract dependencies

are now added in a callback at the end of Portfile parsing,

rather than immediately on setting a use_* option, so the

dependencies reflect the final option values.

(#64960, jmr in 4d1304b)

- Timestamps in logs now have millisecond precision.

(#72600, jmr in 871d039)

- Fixed error when running 'port info --index --fullname'.

(jmr in b413e63)

Release 2.11.6 (2025-10-29 by jmr)

- Fixed possible failure of (x)install -d when something else

creates the directory while it is running.

(#72886, jmr in 97aedd9)

- Fixed sandbox error when building with Xcode on Mac OS X 10.5.

(#72940, jmr in 81ada26)

- Prefer to use /usr/bin/bsdtar for HFS Compression when possible,

since the libarchive port doesn't work while its dependencies

are being upgraded. (#73103, jmr in c391f3f)

- Fixed permissions errors due to incorrect group membership

management. (#73160, jmr in 4497293)

Release 2.11.5 (2025-08-18 by jmr)

- Fixed unexpected behaviour of (x)install commands on APFS in

some cases. (#72850, jmr in ea247a7, d8cfd53)

- Fixed a Makefile race condition that could cause installing

MacPorts from source to fail sometimes (including when running

selfupdate.) (#72802, jmr in 85db375)

- Fixed incorrect behaviour of 'portindex -p' when not using an

override file. (#72785, jmr in 1b58a9d)

- Fixed the last resort entry in release_version_urls used by

selfupdate, which was pointing to the wrong branch and so would

usually not indicate that a new version is available.

(#72823, jmr in 05122e1)

Release 2.11.4 (2025-08-01 by jmr)

- Fixed incorrect handling of existing work directories created by

older MacPorts versions in some cases. (#72740, jmr in bc9bfca)

- 'port lint' no longer incorrectly tells you to use the

compiler_blacklist_versions portgroup. (jmr in 46424c2)

- Fixed error when running 'port mpkg' on some ports.

(jmr in 07950fc)

- Fixed error when building base for a prefix that contains one or

more symlinks. (jmr in 2a7829d)

Release 2.11.3 (2025-07-23 by jmr)

- $workpath is normalized again, since build systems may not apply

normalization consistently. The path is now deterministic, which

means it has to be longer to avoid collisions, though it should

still be shorter than pre-2.11, especially with longer prefixes.

(#72715, jmr in f3369be)

Release 2.11.2 (2025-07-18 by jmr)

- Installing MacPorts from source now uses its own copy of

install(1) on systems that support APFS. As well as improving

performance, this also seems to work around an apparent bug in

the macOS filesystem cache that could cause errors during or

right after selfupdate. (#72689, jmr in 23e60c7)

- The value of $workpath is no longer fully normalized, so that it

and other options based on it (such as $destroot) will remain

consistent before and after the path is created.

(#72701, jmr in 5500c4a)

Release 2.11.1 (2025-07-14 by jmr)

- A warning is printed if the home directory of the macports user

can't be updated, rather than installation failing.

(#72676, jmr in d1e4f04, 639d403)

- The xinstall command no longer fails on macOS 10.12.

(#72680, jmr in 22a8d57)

- Syncing will now create ${prefix}/var/macports/home if it doesn't

exist, to avoid failing. (#72681, jmr in bda1cc8)

- Syncing now adjusts the ownership and permissions on any existing

PortIndex if needed to avoid the portindex command failing when

run unprivileged. (#72677, jmr in 2810b15)

Release 2.11.0 (2025-07-09 by jmr)

- MacPorts now requires Mac OS X 10.5 or later.

- 'port reclaim' now has an option to keep unrequested ports that

are build-time dependencies of requested ports.

(#60754, jmr in bbc10c2)

- 'port reclaim' will now offer to delete old registry snapshots.

(jmr in 6b5f407)

- 'port snapshot' can now export and import snapshots in JSON

format with the new '--export' and '--import' options.

(#16808, cal in 4d9e8a1, f745b45)

- 'port migrate' and 'port restore' will now check if ports set

replaced_by and install the replacement instead. (jmr in 0ff09a1)

- The interactive message confirming the dependencies to be

installed now includes their variants. (jmr in 8d1fbf2)

- 'port mpkg' now checks architectures of dependencies and enables

the universal variant if needed. (#34177, jmr in a83bf73)

- Added 'git' livecheck.type. (makr in c1c02d8)

- compiler.blacklist can now include version comparisons. This

functionality was previously provided by a PortGroup.

(jmr in 89035db)

- Lower-case versions of environment variables controlling network

proxy use are now accepted. (jmr in 5e9ddc1)

- Interactive confirmation will be requested if it looks like all

active ports are about to be uninstalled.

(#46229, jmr in 85438c2)

- 'port uninstall' will once again allow interactively selecting

multiple versions to uninstall when there is ambiguity.

(#70922, jmr in 5d107c1)

- 'port archive' will once again always ensure that an archive

exists for the specified ports, even if port images are stored as

directories on your system. If you just want to install without

activating, use 'port install --no-activate'. (jmr in e372075)

- Signify signatures are supported for the ports tree and archives.

(jmr in d915971, ce4af0f)

- 'port lint' no longer warns about patch filenames that end in a

suffix indicating compression (e.g. .gz).

(#70428, jmr in acc1304)

- 'port diagnose' no longer fails when trying to check the

permissions on directories if they don't exist.

(#72087, jmr in 0a2b468)

- Installing without activating will no longer fail when there is a

declared conflict. (jmr in f17785d)

- 'port rev-upgrade --id-loadcmd-check' no longer fails on install

names containing @rpath or @executable_path.

(#67534, jmr in 34a8990)

- Build directory names are now much shorter to help avoid problems

with some build systems and long paths. A symlink is created with

the previous naming scheme. (#70539, jmr in 9911d29)

- Many copy operations now use clonefile if possible.

(jmr in 3da9cd2)

- Updated the bundled Tcl to 8.6.16. (jmr in 3954f08)

- Updated tcllib to 2.0, including tcllibc.

(jmr in d82c8c9, 7bf1511)

- Changed 'port-tclsh' to a binary instead of a wrapper script to

fix mpstats.

(#72530, cal in 186667728, 5b91e31cc)

Release 2.10.7 (2025-05-05 by jmr)

- Fixed error when installing a port that needs +universal added to

one of its already-installed dependencies.

(#72431, jmr in cf34a5e)

Release 2.10.6 (2025-04-29 by jmr)

- Fixed incorrect handling of master_site_local and

archive_site_local. (#57720, jmr in 00aab6a)

- Fixed error when installing a port that needs one of its

dependencies to be universal and using a PortIndex that was

generated on a machine where that dependency does not support a

universal variant. (jmr in 31f7c7f)

- Improved portindex startup time. (jmr in bdeaa81)

- Changed 'port-tclsh' to a wrapper script instead of a symlink to

fix the Tcl library search path.

(#72359, cal in ddf08fb88, b951449b7)

Release 2.10.5 (2024-11-23 by jmr)

- Fixed error when the Command Line Tools receipt is missing.

(#71339, jmr in dab32c5)

- The darwintrace library used by trace mode no longer aborts when

it encounters an unreadable symlink. (cal in e3eed16)

- Fixed CVE-2024-11681. Thanks to Simon Scannell of Google's Cloud

Vulnerability Research team. (jmr in 906525f)

Release 2.10.4 (2024-11-01 by jmr)

- Fixed destroot_finish error on some older macOS versions.

(#71217, jmr in aa60115)

Release 2.10.3 (2024-10-31 by jmr)

- On Apple Silicon Macs, the port command will now ensure that it

is running natively by relaunching itself if it is started under

Rosetta 2 and build_arch is not set to x86_64 in macports.conf.

Migration is no longer required when MacPorts base is x86_64

only, provided that build_arch is set to x86_64 in macports.conf.

This will ensure that most users are running natively while still

allowing a fully emulated x86_64 installation if desired.

(jmr in eee437c, 425b158)

- Fixed error trying to create the history file in shell mode when

~/.macports doesn't exist yet. (#71143, jmr in e788103)

- Added mitigation for a rarely seen macOS bug affecting handling

of sparse files. (#67336, jmr in af49e24)

- Silenced error message from running 'pragma OPTIMIZE' on the

registry database without write access. (#71017, jmr in c219570)

- Fixed recreating the destroot from an installed port image that

is a directory, as needed by some targets like mpkg.

(#71011, jmr in c3c817e)

- Fixed force activation of conflicting ports. (jmr in 1f52c5a)

Release 2.10.2 (2024-10-01 by jmr)

- Fixed 'port restore' erroring out when a Portfile failed to

parse. (#70903, jmr in 202d58b)

- Worked around a bug in the version of libcurl shipped in recent

macOS versions that was causing crashes when downloading from FTP

sites. (#70764, jmr in ff881a5, 1ac551f)

- 'port snapshot --list' now respects the -q option.

(jmr in e756756)

- Fixed expressions involving the complement operator ("and not")

causing an error when the right hand side evaluated to empty.

(jmr in 96520f2)

- Worked around a bug in Tiger's gnutar that caused an error when

installing from some archives generated on newer systems.

(#70622, jmr in d54e1de)

Release 2.10.1 (2024-08-16 by jmr)

- Fixed issues migrating when running under Rosetta 2 on

Apple Silicon. (#70512, jmr in 567fa44, e291303, 9eb441f)

- Fixed printing the list of installed versions twice when an

ambiguous 'port activate' is run. (#70514, jmr in d27484c)

- The default build_arch is now always arm64 when running on Apple

Silicon hardware, even under Rosetta 2. (#61750, jmr in 05cd570)

Release 2.10.0 (2024-08-07 by jmr)

- 'port space' no longer overcounts the space used by ports that

install links. (#66526, jmr in 11662bd)

- The number of outdated ports is printed after running

'port selfupdate'. (#33820, thelastlin in 4ae6d98)

- 'port selfupdate' now checks whether MacPorts base is outdated by

downloading a small file, and only downloads and extracts the

source code (via http(s)) if a new version needs to be installed.

Integrity of the source is checked using OpenBSD's signify(1).

The old rsync method is used as a fallback if the new method

fails. (#38265, cal in dd3acc4)

- Line continuation is supported in macports.conf by ending lines

with a backslash. (jmr in b86ef1e)

- Ports' files are now activated using clonefile() when on a

filesystem that supports cloning (such as APFS). This should

perform better and use less storage for active ports. Port images

are stored as directories rather than archives in this case. A

'portimage_mode' option has been added to macports.conf to

enable changing which method is used. (#69555, jmr in 4504942)

- The middle part of bin:, lib:, and path: depspecs is no longer

interpreted as a regex. This was mostly undocumented, almost

never used, and made it difficult to use paths containing

characters with special meaning in regexes.

(#69585, jmr in e0c1226)

- Added 'port migrate' action, which can be used after moving to a

new major OS version or CPU architecture to reinstall MacPorts

base and installed ports if needed. (umeshksingla in 6e2f453,

cal in 3f83ad1, 4317a32, f40f655, 72478b1 etc.)

- Added -t and -N options to the default patch.pre_args, to prevent

patch(1) on recent macOS versions from silently reverse-applying

already-applied patches. (vallon in b1f59d8)

- Updated the bundled Tcl to 8.6.14. (jmr in bc46d68)

- Added test.asroot option. (jmr in 6f0de6c)

- Prevented 'port rdeps --full' from looping infinitely when there

are circular dependencies. (#62711, jmr in 49df406)

- Performance improvements for many operations, particularly

boolean expressions and Portfile parsing. (jmr in a28e81c,

169b1ed, 2f3d072, c97e75d, 341d9a0, 46bc1af, etc.)

- Add progress bars to slow activation and deactivation operations.

(cal in b78e320b1, 5e669e4a0, 31c285116, cb3305837, effd43526)

Release 2.9.3 (2024-04-04 by jmr)

- Fixed error due to insufficient privileges to create the work

symlink in some circumstances. (jmr in 51511c8)

Release 2.9.2 (2024-04-02 by jmr)

- Fixed built-in architecture test failing on unreadable files.

(#69478, jmr in e3468c5)

- Fixed some issues that could occur if settings like 'prefix'

contained symlinks, by fully resolving and normalizing paths read

from the config file. (#69327, jmr in b69f0cf)

- Fixed privileges sometimes not being dropped for test target.

(jmr in d304c0a)

Release 2.9.1 (2024-01-31 by jmr)

- Fixed installation of unneeded build-time dependencies when using

source-only mode. (cal in 5988c00)

Release 2.9.0 (2024-01-24 by jmr)

- Upgrade will now update registry metadata if needed for ports

that are not outdated. This should hopefully cut down on revision

increases requiring a rebuild just to do things like add or

remove dependencies. (jmr in bec110b)

- Added new option 'startupitem.logfile.stderr'.

(#67955, mascguy in e70a512)

- Many single-letter command line options should now work when

given after the action name, and apply only to that action. A few

like -N can't easily be turned on and off internally, so if in

doubt, keep putting single-letter options before the action.

(jmr in aec0601)

- Ports that set platforms containing 'any' are now not considered

outdated after major OS updates. (#68256, jmr in 1b4db00)

- Dependencies installed for the first time when upgrading a port

no longer inherit all variants from the dependent port. Arch

checking is now done in this case so +universal is added to the

dependency iff needed. (#67637, jmr in 7be167c)

- Prevented rev-upgrade from complaining about weakly-linked libs

that are not present. (#52700, chrstphrchvz in 77e333a)

- Avoid installing build-time dependencies when force-upgrading an

installed port for which a binary archive will be used.

(#67017, jmr in a9597dc)

- Fixed error when running upgrade with -R and -u options.

(#68019, jmr in 980a5c1)

- Fixed rev-upgrade potentially trying to access registry entries

that have been uninstalled as a result of a rebuild.

(#66186, jmr in 1abd73a)

- Fixed missing make command potentially causing some ports to fail

to parse. (#60881, jmr in 1b4e6a1)

- Prevented destroot.keepdirs from creating files outside the

destroot. (#55673, jmr in 8db11c8)

- Running 'port install' on a port that is already installed will

set the requested flag for that port. (#55085, jmr in 7ed853d)

- Fixed trace mode on Intel macOS 13. (#66358, cal in 4a1b0c7)

- Fixed incorrect trace mode handling of setuid/setgid binaries.

(cal in 9cc9afc)

- Fixed the deactivate and uninstall actions sometimes not handling

multiple ports in correct dependency order if one or more of them

was specified with non-canonical case. (#60446, jmr in 772a9cc)

- Fixed port names that differ only in case not being considered

to be the same when evaulating boolean expressions.

(#50518, jmr in bd02a2f)

- Fixed some issues that could occur in the unusual case that a

mirror has an archive but not its corresponding signature.

(jmr in a774938, f7828b8)

- If the macports user has an incorrect home directory set somehow,

the installer should now fix it. (#49101, jmr in 128e8ce)

- Skip vacuuming the registry database on shutdown (after

uninstalling one or more ports) if it would not save significant

space. (jmr in c82a269)

- Clean up the SQLite write-ahead log file when closing the

registry. (jmr in 9bb06b9)

- Added a simple default test phase for all ports, which currently

just checks the architectures of installed files. 'test.run yes'

enables the tests defined by the Portfile, as before. It should

always be safe to run 'port test' now, and if it fails it means

a test didn't pass. (jmr in ddc2655)

- Using multiple threads for portindex. (jmr in f00bf80)

Release 2.8.1 (2023-01-31 by jmr)

- Fixed 'port lint' complaining about 'platforms any'.

(jmr in 84d8683)

- Specifiers like {darwin any >= 10} are now allowed in platforms.

This means one archive will be shared by all darwin versions, but

it only works on the specified versions.

(jmr in 3d9856b)

- The -stdlib option is now passed to GCC when supported.

(jonesc in ebd2261)

- Fixed the PortIndex not getting correct known_fail values based

on the platforms option when using 'portindex -p'.

(#66301, jmr in a82021a)

- Updated the bundled Tcl to 8.6.13. (jmr in 9edb436)

- No longer automatically creating a symlink in $workpath when the

expected worksrcdir doesn't exist, as this broke some ports.

Either set worksrcdir correctly, or if it can't be determined in

advance, set the new 'extract.rename' option to 'yes'.

(jmr in ffdb7d9, 8ae0d73)

- Added --no-test option for 'port rdeps' to exclude depends_test.

(jmr in f1de2b6)

Release 2.8.0 (2022-10-20 by jmr)

- Fixed an error that occurred in the very specific but apparently

somewhat common circumstances where a port was installed from a

binary archive but failed to activate (usually because of a

conflict with an existing file), and then the port was

uninstalled, and later installed again without cleaning it in

between. (#55445, jmr in bdd0a13)

- Added startupitem.custom_file option, which can be used to

specify the path to an existing .plist file that should be

installed instead of generating one. (jmr in dadc533)

- The platforms option can now indicate which OS versions a port

works on, and known_fail is automatically set on other versions.

(#15712, jmr in 2866618)

- The user is now informed before installing if a port sets

known_fail, with the option to try installing anyway if you

really want to. (#60566, jmr in d863a7e, 3406c5d)

- Attempting to install a port with replaced_by set will now

install the replacement instead. (jmr in 4da66a2)

- Fixed new dependencies installed when upgrading a requested port

being incorrectly marked as requested. (#60648, jmr in 31e10a8)

- The SQLite included with Tcl is now used instead of the system

version. (jmr in 11d2b06)

- MacPorts can now be built without a pre-existing tclsh.

(#61253, jmr in 2eeba4d)

- Updated the bundled Tcl to 8.6.12, as well as tcllib 1.21 and

tclx 8.4.4. (cal in 89abece, 24c34a9, d7cf914, d3d9e4b, etc.)

- Fixed the 'ln' command erroring when told to link more than two

files into a directory. (jmr in b75c464)

- The PortGroup command now prevents multiple inclusion of the same

portgroup. (jmr in 4215012)

- Added xcodecltversion variable containing the installed version

of the Command Line Tools for Xcode. (jmr in d05ebde)

- The vercmp command can now take a comparison operator.

(jmr in 35daead)

- Fixed error when installing ports that change prefix without root

privileges. (#65313, jmr in a594e01, fbfcb9f)

- Fixed possible directory ownership error when syncing with recent

versions of git. (jmr in e0338e8)

- Improved the message printed by 'port diagnose' when the Xcode

version is newer than any we know about. (#63377, jmr in 733d6e7)

Release 2.7.2 (2022-03-09 by jmr)

- Fixed poor trace mode performance on newer OS versions.

(cal in 3b949cc)

- Added escaping of shell-unsafe characters when compressing man

pages in the destroot phase. (#64531, jmr in b6bac45)

- Fixed several cases of unrelated errorInfo being printed when

something failed. (jmr in e5e7dff, b864109)

- Fixed handling of distname containing spaces.

(#64419, jmr in 690fab1)

- Fixed use_xmkmf. (#64011, ryandesign in ce42354, c8ff808)

- Fixed fetch.type cvs. (#63931, ryandesign in c118fb2)

- Avoided error about specified version being unavailable when the

version came from a pseudo-portname like 'outdated'.

(#63438, jmr in db498e0)

- Fixed failure in PortGroup command when the ports tree path

contains spaces. (#63534, jmr in b83c743)

- Fixed incorrect compiler selection logic for certain GCC

versions. (#63281, jmr in 087ce29)

- Added metadata so Installer won't erroneously claim that the

MacPorts .pkg requires Rosetta 2 to install on Apple Silicon.

(#63096, jmr in 09c4373)

Release 2.7.1 (2021-05-26 by jmr)

- Fixed SQL error when MacPorts was built against the 10.15 SDK but

run on 10.14. (#62929, jmr in 0249b3c)

- Fixed poor performance when installing ports containing tens of

thousands of files. (#56793, jmr in fc212a0)

- Fixed a stack trace being printed after an error occurred if

COLUMNS was not set in the environment. (#62935, jmr in 13eeabd)

Release 2.7.0 (2021-05-19 by jmr)

- The 'platforms' option now has a default value of 'darwin'.

(jmr in d918190)

- Fixed incorrect versioning assumptions that led to being unable

to find the right SDK on Big Sur. (#61866, jmr in 8aa347e)

- Fixed installer incorrectly setting DISPLAY in the user's shell

config on Big Sur. (#61649, jmr in 4ce1e96)

- Fixed crash in rev-upgrade when MacPorts was built against the

macOS 11 SDK and run on 10.15. (#61540, jmr in 23f2aa3)

- Fixed minimum compiler version selected when C++14 and

thread-local storage are required.

(#61418, chrstphrchvz in 618d036)

- Enabled write-ahead logging when using SQLite 3.22.0 and later,

and enabled the fullfsync pragma, which should make the database

even more resilient against power failures and the like.

(#61154, jmr in 5779dbc)

- Fixed svn fetch with newer Xcode versions that no longer provide

svn (but do ship a /usr/bin/svn stub) by always using the

subversion port. (#60854, jmr in 4acfd68)

- Logs now explicitly mention the port's version, revision, and

active variants. (#59643, jmr in d484695)

- Improved error reporting when circular dependencies are present

when installing or upgrading ports. (#59289, jmr in cea9833)

- The universal variant is removed if it is not possible to build

for two or more architectures. (#57133, jmr in fcff138)

- New universal_possible variable can be checked to see if

universal building is possible. (jmr in e356e1e)

- Fixed error when choosing the currently active version when

interactively prompted to pick a version by 'port activate'.

(#56817, jmr in 5f41bb4)

- Configuring MacPorts base with --with-no-root-privileges now

also defaults to --without-startupitems. (#56743, jmr in a18eb94)

- Rev-upgrade now makes it more obvious when a port is considered

broken because of using the wrong cxx_stdlib.

(#56629, jmr in 00a2631)

- Fixed missing error message when the sync portion of selfupdate

fails. (#56549, jmr in 8f4b9e5)

- When installing a port, the variants that are requested by the

user (either on the command line or via variants.conf) are now

recorded in the registry in order to distinguish them from

default variants chosen by the port. When upgrading, only the

requested variants from the previous version, rather than all its

active variants, are considered when deciding which variants to

request when installing the new version. (#46956, jmr in 19c9339)

- Added new variables macos_version and macos_version_major, which

contain the full macOS version (like 10.15.7) and the major macOS

version (like 10.15 or 11), respectively. The macosx_version

variable is still available but deprecated.

(#56252, jmr in 1916d6f)

- reclaim: remove everything under build and ccache directories.

(#60126, khindenburg in b9fdb847, d08d261f)

- For various actions, abort if @version specified is not current.

(#60454, khindenburg, jmr in 835a7db1, ca071954)

- Abort when a port includes a nonexistent PortGroup.

(#59787, khindenburg in d9139328)

- Adjust lint --nitpick on patchfiles to allow *.diff or *.patch.

(#59695, khindenburg in 5037999e)

- Display a progress bar when the underlying build system provides the

necessary information, which is currently cmake and ninja.

(#15939, landonf in da3524e)

- Support compressed web pages for livecheck.

(#55011, dgilman in 8c41ca7, d741f0c)

- Added configure.sysroot variable, which is set to either

${configure.sdkroot} if an SDK is being used, or "/" if not.

(#59798, jmr in 8d76ba6)

Release 2.6.4 (2020-11-14 by jmr)

- Fixed incorrectly requiring a full Xcode installation when

building all ports on Big Sur. (#61435, jmr in d58b124)

- Allow building ports for x86_64 on arm64 systems if they don't

support arm64. (#61430, jmr in 94f428e)

- Disabled building the MacPorts SQLite extension by default, since

the system's SQLite on Big Sur no longer supports extensions. Use

the new macports.sqlext port, which has a dependency on MacPorts'

sqlite3 port, to install it. (toby in 4664a4a)

- Fixed calculation of dependencies of up-to-date ports during

upgrade when different variants are specified but

--enforce-variants is not used. (jmr in 81979e5)

- Rev-upgrade no longer warns about libraries that are present only

in the shared cache, since this is normal as of Big Sur.

(jeremyhu in 601864d)

- Fixed incorrect output of 'port info --depends' when used with

multiple ports. (#61083, ryandesign in a7cf423)

- Fixed incorrect warning that the SDK for the current OS version

is missing, when configure.sdk_version has been cleared by the

Portfile. (jmr in 8402cf8)

- Fixed some operations involving fs-traverse failing with paths

containing whitespace. (ryandesign in 52609c9)

- Various changes to support arm64.

(ryandesign, toby in c8ddc79, bfc0544, 7ccf5a2)

- No longer error out immediately when an appropriate SDK cannot

be found, which prevented even actions like 'port info' from

working in that situation. (jmr in 5764fd9)

Release 2.6.3 (2020-07-19 by jmr)

- Correct macports-clang c++11+ compiler selection with non-libc++

installations. (kencu in 3ea1fb4)

- Avoid problems with trace mode on modern macOS.

(#60702, saagarjha, cal in d96e5a85a)

- Added some basic support for Apple Silicon.

(jeremyhu, jmr in 6eaa8d5, 901eb21, 01afdbb)

- Fixed an issue where post-extract ran with elevated privileges when

adduser was used in a Portfile. (#50918, cal in ac1a9b099)

- Fixed cases where a proper error message was not displayed when curl

failed. (#60581, cal in f535c26)

- Reduced the number of processes spawned when pinging mirror sites.

(ryandesign in cee74bb)

- Support new naming scheme used starting with macports-clang-10 in

configure.compiler. (jonesc in 5c3f571)

- Fixed dmg and mdmg targets on 10.15+. (#59697, jmr in 0459cb1)

- Ensure archive paths are correctly quoted when extracting.

(#60365, jmr in 8a088c3)

Release 2.6.2 (2019-10-20 by jmr)

- Added support for zsh to the pkg installer's PATH setup code.

(cal in f9a3b2d)

- Allow individual ports to change prefix without disabling binary

distribution for them. (jmr in d840f25)

- Added warning to install the Command Line Tools when using

Xcode 10 or later and headers corresponding to the current OS

version are not available. (jmr in 8a7d604)

- Always try macports-gcc on ppc systems if system compilers are

blacklisted. (jmr in 42b36f4)

Release 2.6.1 (2019-10-03 by jmr)

- Fixed error on older OS versions that use apple-gcc-4.2.

(#59089, jmr in a3a71b5)

- Fixed 'port diagnose' check for command line tools on some older

OS versions. (kencu in c2a1872)

- Silenced some SDK-related warnings that were repeatedly printed

when using Xcode 11. (jmr in 73ee4b4)

- Improved performance with Xcode 11. (jmr in 3768efd)

- Fixed C++ compiler selection with Xcode 4.x on Snow Leopard.

(kencu in 37c7cfe)

- Fixed 'port info --depends' printing the wrong set of fields.

(#59149, jmr in e62716c)

Release 2.6.0 (2019-09-21 by jmr)

- Extend the touch command to take a -W directory parameter.

(#53730, khindenburg in a90c4b29)

- Added fetch.user_agent option to allow working around servers

that don't like our default User-Agent string.

(slewsys in e5a420c)

- Enabled sending custom headers in livecheck. (jonesc in 84f97ca)

- Improved explanatory message when a port cannot be built with

+universal on macOS 10.14. (#57245, jmr in 918c347)

- Overhauled compiler selection logic. Ports can now specify that

they require a particular C or C++ standard (e.g. C++11),

Fortran, OpenMP, MPI, or TLS, and a suitable compiler will be

chosen based on all these criteria. (#55139, mcalhoun in 5e17a69)

- Rewrote handling of *.env options. This should fix cases where

environment variables were not being set because the old code

silently failed to parse something and skipped all remaining

variables in the list. This change requires different quoting in

some cases: each list element now needs to contain a single

assignment (like VAR=value). (jmr in 9313be5)

- 'port info' with multiple field options now outputs the fields

in the order they were given. (#57003, khindenburg in e115b59)

- Added 'bump' action to assist in updating ports to new upstream

versions. (satraul in 9c91a29)

- Added use_xcode option which indicates that a port requires a

full Xcode installation to build (as opposed to just the Command

Line Tools). This should allow MacPorts to only complain about

Xcode not being installed when it's really needed.

(#58016, satraul in 057ce2b)

- Allow using the 'macosx' SDK when the SDK for the current OS

version is not present. This comes with its own problems, but

it's better than not being able to build anything.

(#57143, jmr in 8caac19)

- The default cxx_stdlib for 10.6-10.8 is now libc++. It is

recommended that users on these OS versions run rev-upgrade to

rebuild any ports using libstdc++. (jmr in 6b7846a)

Release 2.5.4 (2018-10-03 by jmr)

- Fixed a reclaim failure when the distfiles option contains a list

of one or more empty strings. (#56786, jmr in 8a67087)

- Changed the 'default' command to not require overquoting of the

default value that is being set. (jmr in 8434c0e)

- Indicate that i386 is not supported by the macOS 10.14 SDK.

(jmr in 60544ce)

Release 2.5.3 (2018-07-05 by jmr)

- Fixed failures due to insufficient privileges on older OS versions.

(#56721, jmr in 4b36e60)

- Fixed 'port reclaim' failing when installed ports have circular

dependencies. (#56730, jmr in f4affba)

- Fixed 'port provides' on Tiger. (#56620, jmr in 6ba4c34)

- Fixed os.platform value set by portindex -p. (jmr in e45ab90)

Release 2.5.2 (2018-06-05 by jmr)

- Fixed expression used to check for g++-mp-* when choosing default

configure.cx_stdlib (#56605, jmr in 3e430f1)

Release 2.5.1 (2018-06-04 by jmr)

- Set the default value of configure.cxx_stdlib to macports-libstdc++ when

using macports-gcc-* compilers. (jmr in feaba00)

- Worked around failure to activate ports containing read-only files in

non-root-owned MacPorts installations by disabling hfscompression for

those installations. (#56563, jmr in cf91a8b)

- Fixed failure to record that a port has overridden cxx_stdlib when

installing from an archive generated by an older version of MacPorts.

(jmr in a514690)

Release 2.5.0 (2018-05-28 by jmr)

- New pseudo-portname 'rleaves', matching installed ports that are

unrequested and that no requested ports depend on.

(danchr in b042c0e7)

- 'port reclaim' will automatically run 'port rev-upgrade' at the end.

(danchr in eed6ffce)

- 'port reclaim' will only remove all unrequested ports as manual

selection of a subset could break dependents.

(g5pw in 3578400b)

- 'port reclaim' respects -N for non-interactive and -y for dry run mode.

(#53857, raimue in 08d0a695)

- New flag 'port fetch --no-mirrors' which will only fetch from URLs

in master_sites.

(raimue in 0cf1faf2)

- 'port selfupdate --nosync' has been deprecated, use '--no-sync' instead.

(#56434, raimue in ce6d4817)

- Apply HFS+ compression on activation when bsdtar is available and

supports --hfsCompression. Used automatically when libarchive is

installed.

(#36560, eborisch, raimue in 829557e2)

- Allow dots in variant names.

(#46807, raimue in c3f08731)

- Sandbox allows access to /dev/ptmx and /dev/ttys*

(ryandesign in 8765c142)

- New option use_tar for ports that use uncompressed tar archives

as distfile.

(ryandesign in f10e0e37)

- Add depends_patch to handle the patch dependencies of ports

(#52445, khindenburg in a74c159d)

- Add the ability to handle xz patch files

(#52445, khindenburg in 5a142fd2)

- The cxx_stdlib and delete_la_files settings are taken into account when

determining which archive sites can be used. (#56053, jmr in cbbc31e)

- New options startupitem.debug and startupitem.daemondo.verbosity

(#22471, jmr in fd19a71)

- StartupItems installed by a port are unloaded when the port is

deactivated, and reloaded after it is upgraded.

(#23677, jmr in 738e5f5)

- The message about how to load a port's StartupItem is now part of the

notes, and will thus be displayed when ports are installed from a

binary archive, and can be reviewed later with 'port notes'.

(#31798, jmr in 6faf3f8)

- startupitem_autostart macports.conf setting allows autostart to be

disabled for all ports. (#40074, jmr in 85ffdc7)

- Ports can install more than one StartupItem using the 'startupitems'

option. (#44295, jmr in 99d5fb3)

- Having a different startupitem.install setting than was used when

a binary archive was built now works. (#44496, jmr in 3dde77d)

- 'port load' will now attempt to load launchd plists even if they have

not been installed in /Library. (#44497, jmr in ec4ae2d)

- StartupItems installed as LaunchAgents can be loaded for the current

user with 'port load'. Loading LaunchDaemons still requires root.

(jmr in 190bf96)

Release 2.4.4 (2018-05-06 by jmr)

- Use subversion port instead of /usr/bin/svn in fetch phase

on OS X 10.11 El Capitan and earlier.

(#55933, ryandesign in 8a3b73d263, c8fd1a3098, 62e07cae09)

- Use git port instead of /usr/bin/git in fetch phase

on OS X 10.8 Mountain Lion and earlier.

(#55989, ryandesign in 78990c5ab7, e6eedb05dd)

- 'port reclaim' works correctly with distfiles with tags.

(#55939, raimue in 3ad97625)

- Trace mode with ccache enabled works correctly when the ccache-devel

port is installed.

(#55680, raimue in 64c60f29)

- Add 'size' to the set of default checksums.

(ryandesign in 95a153e6)

- An error will be raised immediately if the revision or epoch options

are set to something that is not an integer. (#26486, jmr in 387cd8c)

- 'port mirror' will skip ports that have the special keyword 'NoMirror'

in their license option. (raimue in fae17c2)

Release 2.4.3 (2018-04-11 by jmr)

- Fix trace mode on macOS High Sierra 10.13.3

(#55575, raimue in 995dde84)