STMicroelectronics Customer Community

What's happening now

See the latest activity, browse open questions, and explore categories.

Recent activity
No best answer
Categories

Beginner, trying to select STM32 for school related project

GreetingsI am apprentice in electronics and for a school project I am trying to build a digital clock based on an STM32. I want to use an ST7735 based SPI display to show the time, because I am already familiar with the Adafruit GFX library (I did so

474

2 minutes ago

John_MVisitor II

Automotive MCUs

SPC5studio issues.

Hi All,Ok new to SPCSudio and currently using version 6 - have big problems with components inparticular PAL.Basically all the tutorial talk about using PAL to flash an LED or toggle a GPIO pin.But version 6 appears not to support this!!!So far eve

12 minutes ago

Anthony_ModRetroVisitor

STM32 MCUs Embedded software

ADC Enable Required after Calibration, STM32C0

In RM0490 Rev 6, Reference Manual for the STM32C0, the ADC Software Calibration Process is specified as follows: Software calibration procedure1. Ensure that ADEN = 0, AUTOFF = 0, ADVREGEN = 1, and DMAEN = 0.2. Set ADCAL = 1.3. Wait until ADCAL = 0 (

101

14 minutes ago

DigitalNomadAssociate

STM32CubeIDE for Visual Studio Code (MCUs)

😎.clang-tidy support for STM32Cube clangd

Hey -- We would like to include a minimal version of .clang-tidy in our VS Code STM32 project. We use the STM32Cube clangd extension (through the STM32CubeIDE for Visual Studio Code Extension Pack). From our research it appears support for .clang-ti

433

1 hour ago

Martin Jay McKeeAssociate

STM32CubeMX2 (MCUs)

STM32CubeMX2 Failing to Start

I am running STM32CubeMX2 (1.1.1) on a Mac (Tahoe 26.6.2) and I did (with some difficulty) get it installed and running. I configured a MCU (STM32C552CEUx) and generated an STM32CubeIDE project. No problem.I went back and copied the .ioc2 file, renam

1348

2 hours ago

SteaveAssociate

STM32 MCUs Wireless

[STM32WL3] RM0511 Rev 6: colored cells missing in register map tables

Hi, could you please check the colored cell highlighting in RM0511 Rev 6 register map tables?For example, page 304 states "The green cells indicates the register is in the VDD12o power domain" but no green cells are visible.This affects at least Tabl

3 hours ago

Anderson SantosAssociate

STM32 MCUs Embedded software

How to define safe and non-safe zone banks without using STMCubeProgrammer software

Hello everyone,I'm developing an application using the STM32H563 with TrustZone enabled. Online tutorials first show configuring the fuse bits using the STMCubeProgrammer software:TZENSECWM1_STRTSECWM1_ENDSECWM2_STRTSECWM2_ENDThen, the application is

461

4 hours ago

christophe.durandVisitor

STM32 MCUs Embedded software

STM32U595 bootloader resets when no peripheral is connected

Here is my main and jump to bootloader :int main(void){ HAL_Init(); SystemPower_Config(); SystemClock_Config(); HAL_Delay(500); // Catch bootloader constantly resetting jump_to_bootloader(); while (1) { HAL_Delay(50); }

382

5 hours ago

Mars_and_beyondAssociate

Power management

STGAP3SXI UVLO and RDY signal

Hello, I’m using 6 of the STGAP3SXI as part of an IGBT 3 phase bridge driver. Each chip has its own 24V to isolated +15V and -9V switching supply (Meanwell GD2-241509) and the logic side is powered with a separate +5V supply. Everything runs normal e

511

5 hours ago

julesrAssociate

Imaging (sensors)

Using VL53L4CX with VL53L4CD's ULP driver

I am using VL53L4CX together with VL53L4CD’s ULD driver. This was discussed before in VL53L4CX using VL53L4CD ULD and it works just fine. I am now willing to improve power-consumption under long-lasting proximity monitoring.I understand that “VL53L4C

6 hours ago

ShockFrostArcherAssociate

STM32 MCUs Boards and hardware tools

Beginner, trying to select STM32 for school related project

474

John_MVisitor II

Anthony_ModRetroVisitor

STM32 MCUs Embedded software