How to add the environment variables in Windows?

I cannot figure out how to set the GOOGLE_APPLICATION_CREDENTIALS on Windows 10.

The documentation is pretty sparse.

I have Node setup OK, and cloned this repo.

I get the following error when running the command node recognize "resources/quit.raw"

Got audio file!
Loading speech service...
{ [Error: Google Cloud Speech API has not been used in project google.com:cloudsdktool before or it is disabled. Enable it by visiting https://console.developers.google.com/apis/api/speech.googleapis.com/overview?project=google.com:cloudsdktool then retry. If you enabled this API recently, wait a few minutes for the action to propagate to our systems and retry.]
code: 403,
errors:
[ { message: 'Google Cloud Speech API has not been used in project google.com:cloudsdktool before or it is disabled. Enable it by visiting https://console.developers.google.com/apis/api/speech.googleapis.com/overview?project=google.com:cloudsdktool then retry. If you enabled this API recently, wait a few minutes for the action to propagate to our systems and retry.',
domain: 'global',
reason: 'forbidden' } ] }

Why is it looking at the wrong project?

How do I set it to look at my project (I have a google project with speech api enabled)

Hey Paul

I could get it working however not on windows 10 but it should not make any
difference
Have you run this line ?

export GOOGLE_APPLICATION_CREDENTIALS=/path/to/service_account_file.json

and created the right file for your application? if not go to

https://cloud.google.com/speech/docs/auth-template/cloud-api-auth#using_the_console_name_short

link which explains just fine how to do that. it works.

Counter question :

Do you have any idea when they will add wrapper for the streaming version too?

Cheers

Greg.

On 24 May 2016 at 16:47, paulcanning [email protected] wrote:

I cannot figure out how to set the GOOGLE_APPLICATION_CREDENTIALS on
Windows 10.

The documentation is pretty sparse.

I have Node setup OK, and cloned this repo.

I get the following error when running the command node recognize
"resources/quit.raw"

Got audio file!
Loading speech service...
{ [Error: Google Cloud Speech API has not been used in project google.com:cloudsdktool
before or it is disabled. Enable it by visiting
https://console.developers.google.com/apis/api/speech.googleapis.com/overview?project=google.com:cloudsdktool
then retry. If you enabled this API recently, wait a few minutes for the
action to propagate to our systems and retry.]
code: 403,
errors:
[ { message: 'Google Cloud Speech API has not been used in project
google.com:cloudsdktool before or it is disabled. Enable it by visiting
https://console.developers.google.com/apis/api/speech.googleapis.com/overview?project=google.com:cloudsdktool
then retry. If you enabled this API recently, wait a few minutes for the
action to propagate to our systems and retry.',
domain: 'global',
reason: 'forbidden' } ] }

Why is it looking at the wrong project?

How do I set it to look at my project (I have a google project with speech
api enabled)

—
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub
#117

export is not a Windows command. (docs only cater for linux)

I got it working by manually adding the env variables in Windows (control panel, system, environment variables)

Also check this out
http://stackoverflow.com/questions/9249830/how-can-i-set-node-env-production-in-windows

greg

On 24 May 2016 at 16:47, paulcanning [email protected] wrote:

I cannot figure out how to set the GOOGLE_APPLICATION_CREDENTIALS on
Windows 10.

The documentation is pretty sparse.

I have Node setup OK, and cloned this repo.

I get the following error when running the command node recognize
"resources/quit.raw"

Got audio file!
Loading speech service...
{ [Error: Google Cloud Speech API has not been used in project google.com:cloudsdktool
before or it is disabled. Enable it by visiting
https://console.developers.google.com/apis/api/speech.googleapis.com/overview?project=google.com:cloudsdktool
then retry. If you enabled this API recently, wait a few minutes for the
action to propagate to our systems and retry.]
code: 403,
errors:
[ { message: 'Google Cloud Speech API has not been used in project
google.com:cloudsdktool before or it is disabled. Enable it by visiting
https://console.developers.google.com/apis/api/speech.googleapis.com/overview?project=google.com:cloudsdktool
then retry. If you enabled this API recently, wait a few minutes for the
action to propagate to our systems and retry.',
domain: 'global',
reason: 'forbidden' } ] }

Why is it looking at the wrong project?

How do I set it to look at my project (I have a google project with speech
api enabled)

—
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub
#117

Why is it looking at the wrong project?

Make sure your GCLOUD_PROJECT environment variable is set to your Google project ID.

Command prompt:

set GCLOUD_PROJECT=your-project-id
set GOOGLE_APPLICATION_CREDENTIALS=/path/to/service_account_file.json

Powershell:

$env:GCLOUD_PROJECT="your-project-id"
$env:GOOGLE_APPLICATION_CREDENTIALS="/path/to/service_account_file.json"

The README no has instructions for setting environment variables in windows.

Hi jmdobry,

I know this post quite old. But I have the same problem about setting environment variable as below:
I want to use Google cloud vision API on Python. I have created a service account for authentication.
Based on the instruction of jmdobry in this post, I set the environment variable with the following commands in cmd (Windows 7)

set GCLOUD_PROJECT=my-project-id
set GOOGLE_APPLICATION_CREDENTIALS=C:/Python install/Google API/filename.JSON

Then, I run the following Python code to test the first API request:

import io
import os

from google.cloud import vision
from google.cloud.vision import types

client = vision.ImageAnnotatorClient()

file_name = os.path.join(
os.path.dirname(file),
'C:/Python install/Python Test/Photos Testing/Lobstersize.jpg')

with io.open(file_name, 'rb') as image_file:
content = image_file.read()

image = types.Image(content=content)

response = client.label_detection(image=image)
labels = response.label_annotations

print('Labels:')
for label in labels:
print(label.description)

But, it shows an error as below:

Traceback (most recent call last):
File "GoogleAPI.py", line 9, in
client = vision.ImageAnnotatorClient()
File "C:\Python install\lib\site-packages\google\cloud\vision_v1\gapic\image_annotator_client.py", line 135, in __init
__
ssl_credentials=ssl_credentials)
File "C:\Python install\lib\site-packages\google\gax\grpc.py", line 106, in create_stub
credentials = _grpc_google_auth.get_default_credentials(scopes)
File "C:\Python install\lib\site-packages\google\gax_grpc_google_auth.py", line 62, in get_default_credentials
credentials, _ = google.auth.default(scopes=scopes)
File "C:\Python install\lib\site-packages\google\auth_default.py", line 292, in default
raise exceptions.DefaultCredentialsError(_HELP_MESSAGE)
google.auth.exceptions.DefaultCredentialsError: Could not automatically determine credentials. Please set GOOGLE_APPLICA
TION_CREDENTIALS or
explicitly create credential and re-run the application. For more
information, please see
https://developers.google.com/accounts/docs/application-default-credentials.

Please help me this issue.

Thank you very much.

Son.

@sonanhson

Hi @sonanhson , I also have the same problem. I have tried setting the environment variable through the above commands and directly through control panel, but the same error persists. Is there any solution to this problem? Is there any other way I can get the vision API up and running locally?

@sonanhson

Hi @sonanhson, I found the solution, use the following code to add the environment variable, it works. But I don't know yet why the other approaches don't work.

import os
os.environ["GOOGLE_APPLICATION_CREDENTIALS"] = "path_to_your_.json_credential_file"

This will also be useful when you are switching between projects that need different credentials.

it helped me)

Hi All,
I need your valuable suggestion, I am using google API(Google.Cloud.Speech.V1) for voice dictation and using C# as code behind. Below is the part of Code:

but I'm getting exception "Status(StatusCode=PermissionDenied, Detail="Cloud Speech API has not been used in project 19063669187 before or it is disabled. Enable it by visiting https://console.developers.google.com/apis/api/speech.googleapis.com/overview?project=19063669187 then retry. If you enabled this API recently, wait a few minutes for the action to propagate to our systems and retry.")".

As one suggestion is given by Hgergely is to run the below code:

export GOOGLE_APPLICATION_CREDENTIALS=/path/to/service_account_file.json

But where I have to run this line of code. I did run in cmd but didn't work. In code behind 'export' keyword is not acceptable.

Please do provide your valuable suggestion with clear details.
Thanks...

@rajeshray02

@rajeshray02 use this from command line:
set GOOGLE_APPLICATION_CREDENTIALS=/path/to/service_account_file.json

Why is it looking at the wrong project?

Make sure your GCLOUD_PROJECT environment variable is set to your Google project ID.

Command prompt:
set GCLOUD_PROJECT=your-project-id
set GOOGLE_APPLICATION_CREDENTIALS=/path/to/service_account_file.json
Powershell:
$env:GCLOUD_PROJECT="your-project-id"
$env:GOOGLE_APPLICATION_CREDENTIALS="/path/to/service_account_file.json"

After all the struggles, I didn't include the $ dollar sign

export is not a Windows command. (docs only cater for linux)

I got it working by manually adding the env variables in Windows (control panel, system, environment variables)

I am setting it manually, still, I get the same error.

@sakthigeek

Still struggling with this myself but @sakthigeek solutions seems to have worked by setting it explicit. Interested to see if anyone else found a solution on Windows by setting it via CMD/PowerShell or through the UI of the control panel

For Windows CMD:
set GCLOUD_PROJECT=foobar
set GOOGLE_APPLICATION_CREDENTIALS=path/to/your/file.json
Important!
I was really struggling with it since I noticed that the problem was due to double quotes
DON'T USE Double quotes!